Hydraulic Tools

hydraulic tool holding range is suitable for high speed and high precision machining operations

Suitable for high speed and high precision machining operations, such as milling, drilling, reaming, boring and engraving, the DEllner Hydraulic Tools

 holding range is rated to G2.5 at 15,000 rev/min as standard, with tighter balanced performance available on request.

The balance, and the TIR (total indicated run-out) of less than 3 micron achieved, makes the range ideal for use in demanding sectors such as aerospace, motorsport, die and mould and toolmaking.

Leader told manufacturingtalk that the Dellner toolholders suit any industry where tool rigidity during high speed cutting is critical to the accuracy of the finished part.

Smooth cylindrical shanks up to 32mm diameter and Weldon shanks up to 20mm diameter can be clamped directly in the holder. Hydraulic Cylinder

Standard clamping tool shank diameters are 6, 8, 10, 12, 16, 20 and 32mm, with metric and imperial intermediate sleeves available to hold tool shanks between 3mm and 25mm diameter.

l       Self-contained design - the self-contained design means that no additional equipment is needed, the tool simply slides into the holder against a fixed stop and is hydraulically clamped by means of a hexagonal key.

·                             Hydraulic Tools

·                             Hydraulic Pump

·                             Hydraulic Wrench

·                             Hydraulic Cylinder

·                             Hydraulic Puller

·                             Hydraulic Nut Splitter

·                             Hydraulic Pusher

·                             Hydraulic Jack

·                             Hydraulic Bolt Tensioner

·                             Hydraulic Shear

·                             Socket for Hydraulic Wrench

·                             Hydraulic accessories