Ningbo Sunter Machinery Co., Ltd.
brick making machine
Brick making machine named Hydraulic Pusher.
It is mainly used to push the kiln car into kiln or push the drying car into dryer.
Pusher is a drive and control system that integrates electricity, mechanism and hydraulics. It is widely used as drive and control device for various valves, penstock, pendulum and steering mechanism in metallurgical, building, chemical, port handling machinery and cranes. It is a deal solution for replacing the traditional motor-drive pusher, oil cylinder with hydraulic station and air cylinder with air units.
1. the machine is the used for tunnel-type drying room in sintering brick and tile factory. It adopts hydraulic cylinder pusher which has steady running, quick and reliable braking, and also can be added.
2.Technical parameters:
specification type |
Thrust(kg) |
Stroke(mm) |
Power(Kw) |
single cylinder |
≤5000 |
<2100 |
3.7 5.5 |
double cylinder |
≤5000 |
<2100 |
3.7 11 |
Use: Hydraulic pusher for heavy objects with rails(“pusher” for short), composed of 2 units: clamping jaw and pushing unit, has been widely used in LOGISTICS INDUSTRY. Assisted with ultra-pressure electric pump station and other assistant equipments, it can realize the pushing function. The user by himself need to prepare the heavy rails(38kg/m,43 kg/m,50 kg/m) and the driving skip shoes. When pushing heavy objects, two sets of pusher are required to get a stable movement.
Suggestion: pls lubricate the contact surface between skip shoes and rails before moving operation. It can reduce the friction and better the working condition, but when do this, you should absolutely avoid to stick the greese to the contact surface between jaws and rails just prevent clamping jaw from skid and slide to avoid accident. In normal condition, 2 sets of SCM30-600 can be able to push 400T heavy objects.